| 1. | Test methods for water vapor transmission of rigid containers
硬包装容器透湿度试验方法 |
| 2. | Safety of packaging machines - pre - formed rigid container packaging machines
包装设备的安全.预制刚性容器包装设备 |
| 3. | Standard test method for leakage testing of empty rigid containers by vacuum method
用真空法进行空瓶罐泄漏试验的标准试验方法 |
| 4. | Packaging machines safety - part 2 : pre - formed rigid container packaging machines
包装机械的安全性.第2部分:预成型刚性容器包装机 |
| 5. | So if it ' s not enclosed in a rigid container , it ' s volume will change also
如果它没有被限制在一个刚性的容器里面，它的体积也会发生改变。 |
| 6. | Safety of packaging machines - part 2 : pre - formed rigid container packaging machines ; german version en 415 - 2 : 1999
包装机械的安全性.第2部分:预成形刚性容器包装机 |
| 7. | Sterilizing and disinfecting equipment for medical products - specification for steam sterilizers for aqueous fluids in sealed rigid containers
医疗制品灭菌消毒设备.第2部分:含水液体密封硬质容器用蒸汽消毒器规范 |
| 8. | Place the specimen container in a plastic bag with the request form outside the bag , then place the specimens in a rigid container , and keep specimens upright to minimize the possibility of spillage
把样本容器放入外附化验表格的胶袋内，然后将之放进坚实的容器内。保持样本直立，以尽量防止溅溢。 |
| 9. | Since liquids are generally kept in some kind of rigid container , the expansion takes place at the upper surface only , so that the level of the liquid rises as its temperature is increased and falls with a decrease in temperature
由于液体一般是保存在某种坚固的容器中的，膨胀只在液体的表层发生，因而液面随着温度增加而升高，随着温度下降而下降。 |
| 10. | Put the used needles and syringes in a rigid container such as a biscuit can when the container is filled up to two - third , make sure to screw the lid on tightly and then seal up with strong tape to prevent the dislodge of the can cover
放置在罐内的针筒针咀载满至罐的容量三分之二后，用胶纸封密盖口，以免在运送垃圾过程中罐盖松脱，针咀外露引致针刺意外。 |
